[FS#3581] Upload speed regression when connected 100Mbps Lan cable into Wan port on TP-Link Archer C6 V2 RU

OpenWrt Bugs openwrt-bugs at lists.openwrt.org
Wed Jan 20 08:31:28 EST 2021


THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - Atroxmorts (Atroxmorts) 

Attached to Project - OpenWrt/LEDE Project
Summary - Upload speed regression when connected 100Mbps Lan cable into Wan port on TP-Link Archer C6 V2 RU
Task Type - Bug Report
Category - Kernel
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Critical
Priority - Very Low
Reported Version - openwrt-19.07
Due in Version - Undecided
Due Date - Undecided
Details - OpenWRT 19.07.6 And Trunk

When connected 100 Mbps cable into WAN port i have upload speed regression (Speedtest and iperf3)

Regression on 1 Gbs Lan, 2.4 and 5GHz clients. If i changed lan port on lan card to 100Mbs FD - no regression оn this client, but i see it on other 1Gbs lan cliens and wireless.

There is no upload speed regression when connected 1Gbs cable into Wan port. There is no probem on stock firmware


Rus.

Деградация скорости отдачи на проводных гигабитных клиентах и на Wifi ,если в Wan порт подключен 100 мегабитный кабель. Если на конкретном проводном клиенте переключить порт на 100 Мбит полный дуплекс-регрессия на нем пропадает, но сохраняется на Wifi.
Деградация скорости не наблюдается при подключении гигабитного кабеля в Wan порт. На стоке проблемы нет.

 

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3581

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.



More information about the openwrt-bugs mailing list