[FS#3572] ath79: ar934x internal switch port 5 missing

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - Michael Pratt (mcpratt) 

Attached to Project - OpenWrt/LEDE Project
Summary - ath79: ar934x internal switch port 5 missing
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - High
Priority - Very Low
Reported Version - All
Due in Version - Undecided
Due Date - Undecided
Details - Applies to all versions including master branch,
but only in ath79 target
old ar71xx target does not have the problem

for the internal built-in switch for ar934x series
port 5 of the switch is missing, and therefore physical ports
that are connected to port 5 of the internal switch instead of GMAC0
cannot be used.

Attempting to set a VLAN that includes port 5 never takes effect.

This issue is not noticed for many other ar934x boards with 5 physical ports
because routers with 4 LAN and 1 WAN port use GMAC0 for the WAN port
instead of port 5 of the internal switch.

in ar71xx the driver is
target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c

in ath79 the new driver is
target/linux/generic/files/drivers/net/phy/ar8216.c

for 2 of my AR9341 boards
EAP300 v2 and ENS202EXT
port 5 is missing from swconfig output

ath79 output:


root at OpenWrt:~# swconfig dev switch0 show
Global attributes:
        enable_vlan: 1
        ar8xxx_mib_poll_interval: 500
        ar8xxx_mib_type: 0
        enable_mirror_rx: 0
        enable_mirror_tx: 0
        mirror_monitor_port: 0
        mirror_source_port: 0
        arl_table: address resolution table
Port 0: MAC 88:dc:96:34:64:d4
Port 1: MAC 00:e1:18:b0:01:1f

Port 0:
        mib: MIB counters
RxGoodByte  : 810502 (791.5 KiB)
TxByte      : 505477 (493.6 KiB)

        pvid: 0
        link: port:0 link:up speed:1000baseT full-duplex txflow rxflow
Port 1:
        mib: MIB counters
RxGoodByte  : 493285 (481.7 KiB)
TxByte      : 802608 (783.7 KiB)

        pvid: 1
        link: port:1 link:up speed:100baseT full-duplex auto
Port 2:
        mib: No MIB data
        pvid: 0
        link: port:2 link:down
Port 3:
        mib: No MIB data
        pvid: 0
        link: port:3 link:down
Port 4:
        mib: No MIB data
        pvid: 0
        link: port:4 link:down
VLAN 1:
        vid: 1
        ports: 0t 1



ar71xx output:


root at OpenWrt:/# swconfig dev switch0 show
Global attributes:
        enable_vlan: 1
        mirror_monitor_port: 15
Port 0:
        enable_mirror_rx: 0
        enable_mirror_tx: 0
        pvid: 0
        link: port:0 link:up speed:1000baseT full-duplex txflow rxflow
Port 1:
        enable_mirror_rx: 0
        enable_mirror_tx: 0
        pvid: 2
        link: port:1 link:down
Port 2:
        enable_mirror_rx: 0
        enable_mirror_tx: 0
        pvid: 1
        link: port:2 link:down
Port 3:
        enable_mirror_rx: 0
        enable_mirror_tx: 0
        pvid: 1
        link: port:3 link:down
Port 4:
        enable_mirror_rx: 0
        enable_mirror_tx: 0
        pvid: 1
        link: port:4 link:down
Port 5:
        enable_mirror_rx: 0
        enable_mirror_tx: 0
        pvid: 1
        link: port:5 link:down
VLAN 0:
        vid: 0
        ports: 0t
VLAN 1:
        vid: 1
        ports: 0t 2 3 4 5
VLAN 2:
        vid: 2
        ports: 0t 1



asking for port 5 specifically returns ???


root at OpenWrt:/# swconfig dev switch0 port 5 show
Port 5:
        mib: ???
        pvid: ???
        link: ???



More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3572

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.