[FS#3652] Dir 859 stranger 2.4GHz Wi-Fi

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - VICTOR SANTOS (vct186) 

Attached to Project - OpenWrt/LEDE Project
Summary - Dir 859 stranger 2.4GHz Wi-Fi
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Medium
Priority - Very Low
Reported Version - openwrt-19.07
Due in Version - Undecided
Due Date - Undecided
Details - 
I have a dir-859 running Openwrt 19.07.7, this run stable this version and the older's, but the 2.4GHz Wi-Fi speed in most conditions is capped around 30Mb/s download speed, upload is good, i've tryed changing all wireless options in luci, like tx power or channel Bandwidth, but the result is same, i atually using channel 1 at 20MHz, i have another router TP-LINK TL-WR740N running DD-WRT and it can provide more than 45Mb/s over 2.4GHz at 20MHz, and the DD-WRT running on same dir-859 can provide same speed's than 740n on 2.4GHz, the dir-859 can reach 40Mb/s if i run speedtest on nearest servers, but a toronto server or any server with more latency is capped to around 30Mb/s, and i only have 2.4Ghz devices :/

The dir-859 speedtest on fdcservers.net toronto: https://www.speedtest.net/my-result/a/7089190072.png

The TL-WR740N on same server: https://www.speedtest.net/my-result/a/7089192985.png

tell me the config files or log's that i have to send.

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3652

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.