[FS#3635] ath10k: firmware crashed

Sat Feb 20 05:08:38 EST 2021

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - Kurt Roeckx (kroeckx) 

Attached to Project - OpenWrt/LEDE Project
Summary - ath10k: firmware crashed
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Medium
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - My UniFi AC Mesh running 21.02 snapshot r15831-c74df745fd has this in my log:

[ 1715.191720] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1715.294116] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1715.396516] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1715.498905] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1715.601318] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1715.703702] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1715.806115] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1715.908510] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1716.010907] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1716.113290] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1716.215688] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1716.318109] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1716.420502] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1716.522896] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1716.625301] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1716.727684] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1716.830098] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1716.932500] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1717.034895] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1717.137283] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1717.239690] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1717.342114] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1717.444500] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1717.546894] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1717.649293] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1717.751693] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1717.854094] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1717.956495] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1718.058892] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1718.161286] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1718.263681] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1718.271341] ath10k_pci 0000:00:00.0: Cannot communicate with firmware, previous wmi cmds: 36904:353754 36954:353752 36904:353749 36952:353584, jiffies: 354560, attempting to fake crash and restart firmware, dev-flags: 0x42
[ 1718.291750] ath10k_pci 0000:00:00.0: failed to transmit management frame via WMI: -11
[ 1718.300015] ath10k_pci 0000:00:00.0: failed to send pdev bss chan info request: -143
[ 1718.308461] ath10k_pci 0000:00:00.0: failed to send wmi nop: -143
[ 1718.314811] ath10k_pci 0000:00:00.0: could not request stats (type -268435456 ret -143 specifier 1)
[ 1718.325136] ath10k_pci 0000:00:00.0: failed to set beacon mode for vdev 0: -143
[ 1718.332778] ath10k_pci 0000:00:00.0: failed to set dtim period for vdev 0: -143
[ 1718.340655] ath10k_pci 0000:00:00.0: firmware crashed! (guid a52d4b9b-9667-488b-ab50-d1d73889fafc)
[ 1718.350008] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[ 1718.359543] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 1718.368055] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1718.379465] ath10k_pci 0000:00:00.0: firmware ver 10.1-ct-8x-__fW-022-ecad3248 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 3e4cf97f
[ 1718.410832] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 1718.418398] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1
[ 1718.428286] ath10k_pci 0000:00:00.0: firmware register dump:
[ 1718.434145] ath10k_pci 0000:00:00.0: [00]: 0x00940750 0x00400C00 0x00980000 0x009AF0DC
[ 1718.442379] ath10k_pci 0000:00:00.0: [04]: 0x009AF148 0x009AF264 0x00941B6C 0x00941B20
[ 1718.450590] ath10k_pci 0000:00:00.0: [08]: 0x00941B00 0x009423A4 0x009422DC 0x009422C4
[ 1718.458779] ath10k_pci 0000:00:00.0: [12]: 0x00941B90 0x009423F4 0x009423D4 0x009423DC
[ 1718.466967] ath10k_pci 0000:00:00.0: [16]: 0x009423E4 0x009423EC 0x00942888 0x00942520
[ 1718.475167] ath10k_pci 0000:00:00.0: [20]: 0x009424FC 0x0094241C 0x00942540 0x00942498
[ 1718.483381] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1718.491007] ath10k_pci 0000:00:00.0: [24]: 0x00942450 0x0094250C 0x009424D0 0x00942750
[ 1718.499190] ath10k_pci 0000:00:00.0: [28]: 0x00942798 0x00942844 0x009428C4 0x00942594
[ 1718.507384] ath10k_pci 0000:00:00.0: [32]: 0x0094258C 0x00942C28 0x00942F4C 0x00942F7C
[ 1718.515575] ath10k_pci 0000:00:00.0: [36]: 0x00942F90 0x00942FE4 0x00942FF8 0x00943040
[ 1718.523758] ath10k_pci 0000:00:00.0: [40]: 0x0094077C 0x00940790 0x00943084 0x00942F00
[ 1718.531945] ath10k_pci 0000:00:00.0: [44]: 0x009AF290 0x00942A80 0x00942D40 0x00942D64
[ 1718.540127] ath10k_pci 0000:00:00.0: [48]: 0x00942D78 0x00942D9C 0x00957E18 0x00957E28
[ 1718.548338] ath10k_pci 0000:00:00.0: [52]: 0x00957E20 0x00940788 0x009430EC 0x00000000
[ 1718.556549] ath10k_pci 0000:00:00.0: [56]: 0x00000000 0x00000000 0x00000000 0x00000000
[ 1718.564731] ath10k_pci 0000:00:00.0: Copy Engine register dump:
[ 1718.570890] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1718.578520] ath10k_pci 0000:00:00.0: [00]: 0x00057400   8   8   3   3
[ 1718.585189] ath10k_pci 0000:00:00.0: [01]: 0x00057800  13  13 111 112
[ 1718.591857] ath10k_pci 0000:00:00.0: [02]: 0x00057c00   8   8   7   8
[ 1718.598526] ath10k_pci 0000:00:00.0: [03]: 0x00058000   0   0   0   0
[ 1718.605192] ath10k_pci 0000:00:00.0: [04]: 0x00058400 2781 2781 152 112
[ 1718.612035] ath10k_pci 0000:00:00.0: [05]: 0x00058800   0   0 447 448
[ 1718.618718] ath10k_pci 0000:00:00.0: [06]: 0x00058c00  19  19  19  19
[ 1718.625388] ath10k_pci 0000:00:00.0: [07]: 0x00059000   0   0   0   0
[ 1718.632136] ath10k_pci 0000:00:00.0: debug log header, dbuf: 0x411ac0  dropped: 0
[ 1718.639942] ath10k_pci 0000:00:00.0: [0] next: 0x411aa8 buf: 0x40fefc sz: 1500 len: 416 count: 26 free: 0
[ 1718.649941] ath10k_pci 0000:00:00.0: ath10k_pci ATH10K_DBG_BUFFER:
[ 1718.656389] ath10k: [0000]: A9031B00 204CFC0B 0A000000 0B000000 BE031B00 204CFC0B 0A000000 0B000000
[ 1718.665737] ath10k: [0008]: D2031B00 204CFC0B 0A000000 0B000000 E7031B00 204CFC0B 0A000000 0B000000
[ 1718.675125] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1718.682749] ath10k: [0016]: FB031B00 204CFC0B 0A000000 0B000000 10041B00 204CFC0B 0A000000 0B000000
[ 1718.692106] ath10k: [0024]: 24041B00 204CFC0B 0A000000 0B000000 39041B00 204CFC0B 0A000000 0B000000
[ 1718.701521] ath10k: [0032]: 4D041B00 204CFC0B 0A000000 0B000000 62041B00 204CFC0B 0A000000 0B000000
[ 1718.710887] ath10k: [0040]: 76041B00 204CFC0B 0A000000 0B000000 8B041B00 204CFC0B 0A000000 0B000000
[ 1718.720246] ath10k: [0048]: 9F041B00 204CFC0B 0A000000 0B000000 B4041B00 204CFC0B 0A000000 0B000000
[ 1718.729593] ath10k: [0056]: C8041B00 204CFC0B 0A000000 0B000000 DD041B00 204CFC0B 0A000000 0B000000
[ 1718.738944] ath10k: [0064]: F1041B00 204CFC0B 0A000000 0B000000 06051B00 204CFC0B 0A000000 0B000000
[ 1718.748324] ath10k: [0072]: 1A051B00 204CFC0B 0A000000 0B000000 2F051B00 204CFC0B 0A000000 0B000000
[ 1718.757698] ath10k: [0080]: 43051B00 204CFC0B 0A000000 0B000000 58051B00 204CFC0B 0A000000 0B000000
[ 1718.767054] ath10k: [0088]: 6C051B00 204CFC0B 0A000000 0B000000 81051B00 204CFC0B 0A000000 0B000000
[ 1718.776443] ath10k_pci 0000:00:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 1718.784071] ath10k: [0096]: 95051B00 204CFC0B 0A000000 0B000000 AA051B00 204CFC0B 0A000000 0B000000
[ 1718.793416] ath10k_pci 0000:00:00.0: ATH10K_END
[ 1718.798181] ath10k_pci 0000:00:00.0: [1] next: 0x411ac0 buf: 0x40f90c sz: 1500 len: 0 count: 0 free: 0
[ 1718.813280] ath10k_pci 0000:00:00.0: failed to set cts protection for vdev 0: -143
[ 1718.821166] ath10k_pci 0000:00:00.0: failed to recalculate rts/cts prot for vdev 0: -143
[ 1718.829586] ath10k_pci 0000:00:00.0: failed to set preamble for vdev 0: -143
[ 1718.836901] ath10k_pci 0000:00:00.0: failed to set mgmt tx rate -143
[ 1718.845082] ath10k_pci 0000:00:00.0: removing peer, cleanup-all, deleting: peer efa6cb31 vdev: 0 addr: b4:fb:e4:75:27:0b 
[ 1718.960197] ieee80211 phy0: Hardware restart was requested
[ 1719.902509] ath10k_pci 0000:00:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256
[ 1719.920583] ath10k_pci 0000:00:00.0: wmi print 'P 128 V 8 T 410'
[ 1719.926830] ath10k_pci 0000:00:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0'
[ 1719.935389] ath10k_pci 0000:00:00.0: wmi print 'alloc rem: 24984 iram: 38672'
[ 1720.007886] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
[ 1720.015365] ath10k_pci 0000:00:00.0: set-coverage-class, phyclk: 88  value: 0
[ 1720.023696] ath10k_pci 0000:00:00.0: rts threshold -1
[ 1720.037872] ath10k_pci 0000:00:00.0: device successfully recovered

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3635

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.