[FS#1305] Not working UAS driver for usb hdd case ORICO 2599US3-V1

OpenWrt Bugs openwrt-bugs at lists.openwrt.org
Tue Feb 16 23:44:51 EST 2021


THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

The following task has a new comment added:

FS#1305 - Not working UAS driver for usb hdd case ORICO 2599US3-V1
User who did this - Tuan Dang (tuaminx)

----------
Thanks Pauls!

Your method works in my case.
After reboot the router, I remove and plug the USB case back. My USB case is Orico as well.

Before:

[ 1967.676536] usb 2-1: USB disconnect, device number 5
[ 1970.776367] usb 2-1: new SuperSpeed USB device number 6 using xhci-mtk
[ 1970.810880] scsi host0: uas
[ 1970.812615] xhci-mtk 1e1c0000.xhci: ERROR Transfer event for unknown stream ring slot 1 ep 4
[ 1970.821058] xhci-mtk 1e1c0000.xhci: @000000000f6786d0 0ff4c200 00000000 05000000 01058001
[ 1970.829205] xhci-mtk 1e1c0000.xhci: ERROR Transfer event for unknown stream ring slot 1 ep 6
[ 1970.837606] xhci-mtk 1e1c0000.xhci: @000000000f6786e0 0ff4c100 00000000 05000000 01078001


After:

[   88.722743] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
[   88.755214] usb 2-1: UAS is blacklisted for this device, using usb-storage instead
[   88.762904] usb-storage 2-1:1.0: USB Mass Storage device detected
[   88.769553] usb-storage 2-1:1.0: Quirks match for vid 0080 pid a001: 800000
[   88.776798] scsi host0: usb-storage 2-1:1.0
[   89.803411] scsi 0:0:0:0: Direct-Access     TO Exter nal USB 3.0      0203 PQ: 0 ANSI: 6
[   89.813138] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   89.819126] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[   89.827070] sd 0:0:0:0: [sda] Write Protect is off
[   89.831846] sd 0:0:0:0: [sda] Mode Sense: 47 00 00 08
[   89.837352] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   89.850897]  sda: sda1
[   89.856452] sd 0:0:0:0: [sda] Attached SCSI disk


Software list:

root at OpenWrt:~# opkg list | grep usb
kmod-usb-core - 4.14.195-1
kmod-usb-ehci - 4.14.195-1
kmod-usb-ledtrig-usbport - 4.14.195-1
kmod-usb-storage - 4.14.195-1
kmod-usb-storage-extras - 4.14.195-1
kmod-usb-storage-uas - 4.14.195-1
kmod-usb-uhci - 4.14.195-1
kmod-usb2 - 4.14.195-1
kmod-usb3 - 4.14.195-1
libusb-1.0-0 - 1.0.22-2
usbutils - 007-10

----------

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=1305#comment9366

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.



More information about the openwrt-bugs mailing list