[FS#3657] dnsmasq listen on the wrong address after the PPP update
OpenWrt Bugs
openwrt-bugs at lists.openwrt.org
Tue Dec 28 10:56:44 PST 2021
THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.
The following task has a new comment added:
FS#3657 - dnsmasq listen on the wrong address after the PPP update
User who did this - olimpiu (oliver44)
----------
config interface 'loopback'
option device 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix '29c::/48'
option packet_steering '1'
config device
option name 'br-lan'
option type 'bridge'
list ports 'lan1'
list ports 'lan2'
list ports 'lan3'
list ports 'lan4'
config interface 'lan'
option device 'br-lan'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option ip6assign '60'
config device
option name 'wan'
option macaddr ''
config interface 'wan'
option device 'wan'
option proto 'pppoe'
option username ''
option password ''
option ipv6 'auto'
config interface 'wan6'
option device 'wan'
option proto 'dhcpv6'
root at OpenWrt:~# cat /etc/config/dhcp
config dnsmasq
option domainneeded '1'
option boguspriv '1'
option filterwin2k '0'
option localise_queries '1'
option rebind_protection '1'
option rebind_localhost '1'
option local '/lan/'
option domain 'lan'
option expandhosts '1'
option nonegcache '0'
option authoritative '1'
option readethers '1'
option leasefile '/tmp/dhcp.leases'
option resolvfile '/tmp/resolv.conf.d/resolv.conf.auto'
option nonwildcard '1'
option localservice '1'
option ednspacket_max '1232'
option confdir '/tmp/dnsmasq.d'
config dhcp 'lan'
option interface 'lan'
option start '100'
option limit '150'
option leasetime '12h'
option ra 'server'
list ra_flags 'managed-config'
list ra_flags 'other-config'
option dhcpv6 'server'
config dhcp 'wan'
option interface 'wan'
option ignore '1'
list ra_flags 'none'
----------
More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3657#comment10418
You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.
More information about the openwrt-bugs
mailing list