[FS#4212] HOSTAPD_START_FAILED - unable to start wireless interfaces

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - jsilva-iii (jsilva-iii) 

Attached to Project - OpenWrt/LEDE Project
Summary - HOSTAPD_START_FAILED - unable to start wireless interfaces
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - Linksys WRT3200ACM
OpenWrt 21.02.1 r16325-88151b8303 / LuCI openwrt-21.02 branch git-21.357.58218-b3cd473

After updating to the new :
hostapd-common - 2020-06-08-5a8b3662-38
wpad-basic-wolfssl - 2020-06-08-5a8b3662-38

Wifi does not come up the following - the following is from the syslog:
Mon Dec 27 10:35:13 2021 daemon.err hostapd: Line 46: unknown configuration item 'snoop_iface'
Mon Dec 27 10:35:13 2021 daemon.err hostapd: Line 53: unknown configuration item 'vlan_no_bridge'
Mon Dec 27 10:35:13 2021 daemon.err hostapd: Line 55: unknown configuration item 'qos_map_set'
Mon Dec 27 10:35:13 2021 daemon.err hostapd: 3 errors found in configuration file '/var/run/hostapd-phy0.conf'
Mon Dec 27 10:35:13 2021 daemon.err hostapd: Failed to set up interface with /var/run/hostapd-phy0.conf
Mon Dec 27 10:35:13 2021 daemon.notice netifd: radio0 (17393): Command failed: Invalid argument
Mon Dec 27 10:35:13 2021 daemon.notice netifd: radio0 (17393): Device setup failed: HOSTAPD_START_FAILED

I tried with the full wpad, still had the same issue as above.

Reverted to the stock installed packages and resolved the issue.

wpad-basic-wolfssl  2020-06-08-5a8b3662-35
hostapd-common	2020-06-08-5a8b3662-35
 

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=4212

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.