[FS#4202] Reboot on NanoPi R4S broken

OpenWrt Bugs openwrt-bugs at lists.openwrt.org
Sat Dec 25 12:24:42 PST 2021


THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

The following task has a new comment added:

FS#4202 - Reboot on NanoPi R4S broken
User who did this - SocketFork (socketfork)

----------
Wanted to include some debug UART info for this as well:

U-Boot TPL 2021.07 (Dec 24 2021 - 22:15:50)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2021.07 (Dec 24 2021 - 22:15:50 +0000)
Trying to boot from MMC1
mmc_load_image_raw_sector: mmc block read error
Trying to boot from MMC1
mmc_load_image_raw_sector: mmc block read error
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###
----------

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=4202#comment10414

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.



More information about the openwrt-bugs mailing list