[FS#3972] devolo WiFi pro 1200e: 803x_aneg_done: SGMII link is not ok

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - Simon (SimonRoy) 

Attached to Project - OpenWrt/LEDE Project
Summary - devolo WiFi pro 1200e: 803x_aneg_done: SGMII link is not ok
Task Type - Bug Report
Category - Kernel
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Medium
Priority - Very Low
Reported Version - openwrt-19.07
Due in Version - Undecided
Due Date - Undecided
Details - My devolo WiFi pro 1200e with uptodate 19.07 has sometimes connectivity issues on the ethernet ports.
Usually the device works just fine (only a Wifi-Repeater and Wifi-to-eth-bridge).
Sometimes it is not possible to use one or both eth ports.

The logread just spams the following line every seconds:


kern.warn kernel: 803x_aneg_done: SGMII link is not ok


Since this was the first message in the log, I dont know if there are previous errors which help find the problem.
Restarting the network does not help, only rebooting over ssh solves the issue.

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3972

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.