[FS#3959] Adding 802.11s mesh network to Archer C7 does not work ooB

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - Wolf Rogner (wrogner) 

Attached to Project - OpenWrt/LEDE Project
Summary - Adding 802.11s mesh network to Archer C7 does not work ooB
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - Supply the following if possible:
- **Device** problem occurs on
    TP-Link Archer C7 v2, Archer C7 v5
- Software **versions** of OpenWrt/LEDE release, packages, etc.
    21.02_rc3 
    (downloaded from here: 
    - https://firmware-selector.openwrt.org/?version=21.02.0-rc3&target=ath79%2Fgeneric&id=tplink_archer-c7-v2, 
    - https://firmware-selector.openwrt.org/?version=21.02.0-rc3&target=ath79%2Fgeneric&id=tplink_archer-c7-v5)

- Steps to **reproduce**

1. Flash router with prepared image
2. replace wpad-mesh with wpad-mesh-wolfssl (why on earth did you replace openssl with wolfssl?)
2. Create an 802.11s Mesh Point

-> with the default images, wireless is not associated
-> 802.11s link is not established

- Steps to **remedy**

replace 
    ath10k-firmware-qca988x-ct
with
    ath10k-firmware-qca988x

reboot

Mesh network will get associated to the wlan device, mesh starts to work


Wish:
Please replace firmware in standard images as this error is not easy to identify and find a fix.

 

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3959

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.