[FS#3702] Ransmit queue 0 timed out on Netgear R6220

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

The following task has a new comment added:

FS#3702 - Ransmit queue 0 timed out on Netgear R6220
User who did this - sw (mradalbert)

----------
And another one:
[33673.884373] ------------[ cut here ]------------
[33673.893600] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:320 0x8038d700
[33673.907678] NETDEV WATCHDOG: eth0 (mtk_soc_eth): transmit queue 0 timed out
[33673.921563] Modules linked in: pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet
[33674.062798]  ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd gpio_button_hotplug usbcore nls_base usb_common
[33674.146393] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.221 #0
[33674.158515] Stack : 00000000 00000000 00000000 87f24540 00000000 00000000 00000000 00000000
[33674.175150]         00000000 00000000 00000000 00000000 00000000 00000001 87c09d60 5326163c
[33674.191785]         87c09df8 00000000 00000000 00006a48 00000038 8049e2b8 00000008 00000000
[33674.208417]         00000000 80550000 00023bd9 00000000 87c09d40 00000000 00000000 8050d500
[33674.225045]         8038d700 00000140 00000000 87f24540 00000000 802ae4c0 00000000 806b0000
[33674.241676]         ...
[33674.246535] Call Trace:
[33674.246556] [] 0x8049e2b8
[33674.258330] [] 0x8038d700
[33674.265256] [] 0x802ae4c0
[33674.272188] [] 0x8000c1a0
[33674.279117] [] 0x8000c1a8
[33674.286051] [] 0x804870f4
[33674.292978] [] 0x80071e00
[33674.299904] [] 0x8002e798
[33674.306831] [] 0x8038d700
[33674.313806] [] 0x8002e820
[33674.320740] [] 0x86cd0104 [mt76x02_lib at 86cd0000+0x9760]
[33674.332866] [] 0x8038d700
[33674.339807] [] 0x8038d554
[33674.346744] [] 0x80088948
[33674.353671] [] 0x8035d6bc
[33674.360597] [] 0x80088c04
[33674.367524] [] 0x800794a8
[33674.374464] [] 0x804a50b8
[33674.381400] [] 0x80033164
[33674.388334] [] 0x8025b710
[33674.395262] [] 0x80007488
[33674.402185] 
[33674.405324] ---[ end trace bc227ce710c7b244 ]---
[33674.414558] mtk_soc_eth 1e100000.ethernet eth0: transmit timed out
[33674.426925] mtk_soc_eth 1e100000.ethernet eth0: dma_cfg:80000065
[33674.438942] mtk_soc_eth 1e100000.ethernet eth0: tx_ring=0, base=070e0000, max=0, ctx=3541, dtx=3541, fdx=3540, next=3541
[33674.460620] mtk_soc_eth 1e100000.ethernet eth0: rx_ring=0, base=06080000, max=0, calc=1312, drx=1782
[33674.507436] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x5b60000c, 0x10c = 0x80818
[33674.528996] mtk_soc_eth 1e100000.ethernet: PPE started
----------

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3702#comment9587

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.