[FS#3729] RT2800 (MT7620) no multiple SSID

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - xewonder (xewonder) 

Attached to Project - OpenWrt/LEDE Project
Summary - RT2800 (MT7620) no multiple SSID
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - High
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - master branch

MT7620
Nexx WT3020 8M

config wifi-device 'radio0'
	option type 'mac80211'
	option channel '11'
	option hwmode '11g'
	option path 'platform/10180000.wmac'
	option cell_density '0'
	option htmode 'HT40'
	option noscan '1'

config wifi-iface 'wifinet0'
	option device 'radio0'
	option mode 'ap'
	option encryption 'none'
	option network 'lan2'
	option ssid 'Public'

config wifi-iface 'wifinet1'
	option device 'radio0'
	option mode 'ap'
	option encryption 'none'
	option network 'lan'
	option ssid 'Private2'

only "Public" wifi shows 


wlan0     Link encap:Ethernet  HWaddr 38:xxxxxxxxxxx  
          inet addr:192.168.182.1  Bcast:192.168.255.255  Mask:255.255.0.0
          inet6 addr: fe80::3a1c:4aff:fe06:c05b/64 Scope:Link
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:1140 (1.1 KiB)
   

 

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3729

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.