[FS#3365] access USB storage in LEDE for Talon AD7200

OpenWrt Bugs openwrt-bugs at lists.openwrt.org
Sun Sep 27 20:12:12 EDT 2020


THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - Jet Yu (yujianyuanhaha) 

Attached to Project - OpenWrt/LEDE Project
Summary - access USB storage in LEDE for Talon AD7200
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Critical
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - Anybody have an ideal to access USB storage at Talon AD72000 with nexmon firmware? [[https://github.com/seemoo-lab/lede-ad7200 |lede-ad7200]]?

Several ways I have tried:

1. search for path like `/mnt/dev` `/dev/`, I can see my usb flash disk led blinking and there show up the device after I insert the disk, but I can NOT cd into the disk

2. install other tool via `opkg`, especially Quick Start for Adding a USB drive, however, the whole OS will crash down when install `kmod-usb-storage` at step 3 and I have to start all over.

Let me know if any solution

Best.

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3365

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.



More information about the openwrt-bugs mailing list