[FS#3332] packet loss on miwifi-mini @ 19.07.4
OpenWrt Bugs
openwrt-bugs at lists.openwrt.org
Fri Sep 11 13:42:38 EDT 2020
THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.
A new Flyspray task has been opened. Details are below.
User who did this - sergio (sergio)
Attached to Project - OpenWrt/LEDE Project
Summary - packet loss on miwifi-mini @ 19.07.4
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To -
Operating System - All
Severity - High
Priority - Very Low
Reported Version - openwrt-19.07
Due in Version - Undecided
Due Date - Undecided
Details - mt7620 / miwifi-mini
19.07.3 works fine
19.07.4 works bad:
kern.err kernel: [ 6615.438086] mtk_soc_eth 10100000.ethernet eth0: transmit timed out
kern.info kernel: [ 6615.444416] mtk_soc_eth 10100000.ethernet eth0: dma_cfg:80000065
kern.info kernel: [ 6615.450586] mtk_soc_eth 10100000.ethernet eth0: tx_ring=0, base=07780000, max=1024, ctx=17, dtx=17, fdx=16, next=17
kern.info kernel: [ 6615.461258] mtk_soc_eth 10100000.ethernet eth0: rx_ring=0, base=06408000, max=1024, calc=47, drx=48
kern.err kernel: [ 6619.306350] mtk_soc_eth 10100000.ethernet eth0: transmit timed out
kern.info kernel: [ 6619.312684] mtk_soc_eth 10100000.ethernet eth0: dma_cfg:80000065
kern.info kernel: [ 6619.318854] mtk_soc_eth 10100000.ethernet eth0: tx_ring=0, base=07780000, max=1024, ctx=28, dtx=28, fdx=16, next=28
kern.info kernel: [ 6619.329525] mtk_soc_eth 10100000.ethernet eth0: rx_ring=0, base=06470000, max=1024, calc=63, drx=64
kern.err kernel: [ 6623.157217] mtk_soc_eth 10100000.ethernet eth0: transmit timed out
kern.info kernel: [ 6623.163553] mtk_soc_eth 10100000.ethernet eth0: dma_cfg:80000065
kern.info kernel: [ 6623.169720] mtk_soc_eth 10100000.ethernet eth0: tx_ring=0, base=07780000, max=1024, ctx=25, dtx=25, fdx=16, next=25
kern.info kernel: [ 6623.180398] mtk_soc_eth 10100000.ethernet eth0: rx_ring=0, base=06408000, max=1024, calc=59, drx=60
More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3332
You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.
More information about the openwrt-bugs
mailing list