[FS#3327] Ethernet LED assignments incorrect on Linkysys WRT32X
OpenWrt Bugs
openwrt-bugs at lists.openwrt.org
Sun Sep 6 13:19:24 EDT 2020
THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.
A new Flyspray task has been opened. Details are below.
User who did this - Ahmad Jagot (anoother)
Attached to Project - OpenWrt/LEDE Project
Summary - Ethernet LED assignments incorrect on Linkysys WRT32X
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To -
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - openwrt-19.07
Due in Version - Undecided
Due Date - Undecided
Details - Device: Linksys WRT32X
OpenWRT version: OpenWrt 19.07.3 r11063-85e04e9f46
The LAN/WAN link LEDs seem to be incorrectly assigned in OpenWRT (offset by 1):
- LAN Port 1 link results in no LED lighting
- LAN Ports 2-4 light LAN link LEDs 1-3 respectively
- WAN port lights LAN LED 4
The WAN LED is assigned to the correct (and default) interface (eth1) in LUCI. The rest of the LEDs are not configurable, leading me to believe the issue is with indexing of the LEDs themselves, as opposed to LED-Port assignment.
More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3327
You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.
More information about the openwrt-bugs
mailing list