[FS#3471] Mikrotik RB911-5Hn propper nand detection failed (Attachment added)

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

The following task has a new comment added:

FS#3471 - Mikrotik RB911-5Hn propper nand detection failed
User who did this - Alexandros C. Couloumbis (acoul)

----------
Greetings rogerpueyo,

// ⇒ OK, this is an issue I'm also experiencing with the "real" SXT Lite5 I have. It seems that the RESET button polarity is reversed and the kernel understands that it is always pressed. Therefore, at boot time, when you are prompted to press "f" to enter failsafe mode (or, alteratively, to press the reset button), since the button is wrongly detected as always pressed, it enters in failsafe mode.//

//  I tried to fix it in these images here: https://we.tl/t-sSD1Id4jnY . I wonder if you would be so kind to give it a try.//

the above image tftp boots just fine on my device and it does sysupgrade successfully (no failsafe issue)
   OpenWrt 19.07-SNAPSHOT, r11242-6703abb7ca

//Also, you're not seeing the calibration data because you are in failsafe mode, could it be? 
//

//⇒ I would say that if you tftp boot the ar71xx-19.07.4 image I left at https://we.tl/t-sSD1Id4jnY the device won't enter in failsafe mode and you'll get the calibration data under /sys/firmware/routerboot.// 

I am attaching the dmesg-rb911-19_07-SNAPSHOT_r11242-6703abb7ca.txt

after sysupgrade & booting from nand, the directory /sys/firmware/mikrotik/ is empty. if you see above on  dmesg-rb911_18_06_9.txt, ext_wlan_data does exists.

//No worries, now you know your board is disguised as another thing! :)// 

MikroTik, what can I say :)
----------

One or more files have been attached.

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3471#comment9042

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.