[FS#3472] brcmfmac: can't handle firmware responses

OpenWrt Bugs openwrt-bugs at lists.openwrt.org
Wed Nov 25 04:20:50 EST 2020


THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - Arınç (arinc9) 

Attached to Project - OpenWrt/LEDE Project
Summary - brcmfmac: can't handle firmware responses
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - Device: ASUS RT-AC88U
OpenWrt: trunk as of 25th November 2020
Firmware: BCM43664/4 wl0: Nov  5 2018 03:19:56 version 10.28.2 (r769115) FWID 01-d2cbb8fd
Firmware: BCM43664/4 wl0: Jan 30 2019 17:31:05 version 10.10.122.303 (r666429 WLTEST) FWID 01-3569d737
Firmware: BCM43664/4 wl0: Aug 23 2016 17:19:51 version 10.10.69.69 (r625687) FWID 01-8438621f

brcmfmac can't seem to handle firmware responses. Here's the relevant path from the bootlog:

[   11.280145] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM43664/4
[   11.503465] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.asus,rt-ac88u.txt failed with error -2
[   11.514615] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.txt failed with error -2
[   13.870099] ieee80211 phy0: brcmf_msgbuf_query_dcmd: Timeout on response for query command
[   13.878396] ieee80211 phy0: brcmf_c_preinit_dcmds: Retrieving cur_etheraddr failed, -5
[   13.886344] ieee80211 phy0: brcmf_bus_started: failed: -5
[   13.891769] ieee80211 phy0: brcmf_attach: dongle is not responding: err=-5
[   16.350348] pci_bus 0001:01: 1-byte config write to 0001:01:00.0 offset 0x3c may corrupt adjacent RW1C bits
[   16.360143] pci 0001:00:00.0: enabling device (0140 -> 0142)
[   16.365816] pci_bus 0001:00: 2-byte config write to 0001:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   16.375505] pci_bus 0001:00: 2-byte config write to 0001:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   16.385188] brcmfmac 0001:01:00.0: enabling device (0140 -> 0142)
[   16.391296] pci_bus 0001:01: 2-byte config write to 0001:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   16.400978] pci_bus 0001:01: 2-byte config write to 0001:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   16.580152] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM43664/4
[   16.591812] brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.asus,rt-ac88u.txt failed with error -2
[   16.602960] brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac4366c-pcie.txt failed with error -2
[   16.713759] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[   16.952788] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4366c-pcie for chip BCM43664/4
[   16.961624] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[   16.972888] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43664/4 wl0: Nov  5 2018 03:19:56 version 10.28.2 (r769115) FWID 01-d2cbb8fd
[  132.622766] ieee80211 phy1: brcmf_cfg80211_get_channel: chanspec failed (-52)

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3472

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.



More information about the openwrt-bugs mailing list