[FS#3431] SDK try to recompile the whole Kernel

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - Werwill Daswissen (Plonk34) 

Attached to Project - OpenWrt/LEDE Project
Summary - SDK try to recompile the whole Kernel
Task Type - Bug Report
Category - Other
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Medium
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - When i try to compile a external kernelmodule (lq-wave300 from Mandrake-Lee github repo) then it trys to recompile the whole kernel and fail because Kconfig is missed.
I compile by the command:
make V=s package/ltq-wave300-mandrake/compile

> on SDK from 19.07.4 and before it compiled succes (the module was never tested yet because i have only a working snapshoot device)
> selfbuikded snapshoot from 18.10:
  -it fails by missed Kconfig
  -when i copy the kernelsource to buildirectory (via "tar -xf -k ..") then it will try to recompile the whole kernel
  -when i copy the Makefile from old 4.14 Kernel to the current 5.4.72 directory first it works (no compilation of kernelsource) but it hangs on Modpost 2 (no reaaction)
> download snapshoot from 02.11: (fakreroot does not work and must be replaced by Slackware specified)
  -it fails by missed Kconfig, but then it recompile libnl-3 again and prepare my package again ??? and fails finaly by missed Kconfig

mv -f $depbase.Tpo $depbase.Po
awk: cmd. line:1: warning: regexp escape sequence `\#' is not a known regexp operator
  LP      /opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/tools/shared/CmdLine.cpp
awk: cmd. line:1: warning: regexp escape sequence `\#' is not a known regexp operator
  LP      /opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/tools/shared/CmdLine.h
depbase=`echo ../../../../../tools/shared/linux/../Debug.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\
/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/support/mtlkfront.sh /opt/build/owrtsdk/staging_dir/toolchain-mips_24kc_gcc-8.4.0_musl/bin/mips-*linux-g++ -DHAVE_CONFIG_H -I. -I../../../../../tools/shared/linux -I../../..  -DMTLK_SOURCE_VERSION="\"3.4.99.0.0.exported.pre_git_version.REL_3.4.99\"" -DLOG_LOCAL_OID=MTLKFRONT_WILL_FILL_IT -include /opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/config.h -include /opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/.config.h -I../../../../../tools/rtlogger/shared -g -I../../../../../tools/shared/linux/../ -I../../../../../wireless/shared -I../../../../../wireless/shared/linux -I../../../../../tools/shared/3rd_party/iniparser -I../../../../../tools/mttools/shared -I/opt/build/owrtsdk/staging_dir/target-mips_24kc_musl/usr/include  -I/opt/build/owrtsdk/staging_dir/target-mips_24kc_musl/usr/include/libnl3/ -I/opt/build/owrtsdk/staging_dir/target-mips_24kc_musl/usr/include/libnl3/netlink/genl/ -Wall -Wno-multichar -fno-strict-aliasing -O2 -fno-common -fno-builtin  -I/opt/build/owrtsdk/staging_dir/target-mips_24kc_musl/usr/include/libnl3/ -I/opt/build/owrtsdk/staging_dir/target-mips_24kc_musl/usr/include/libnl3/netlink/genl/  -MT ../../../../../tools/shared/linux/../Debug.o -MD -MP -MF $depbase.Tpo -c -o ../../../../../tools/shared/linux/../Debug.o ../../../../../tools/shared/linux/../Debug.cpp &&\
mv -f $depbase.Tpo $depbase.Po
awk: cmd. line:1: warning: regexp escape sequence `\#' is not a known regexp operator
  LP      /opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/tools/shared/Debug.cpp
awk: cmd. line:1: warning: regexp escape sequence `\#' is not a known regexp operator
  LP      /opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/tools/shared/Debug.h
depbase=`echo ../../../../../tools/shared/linux/../ParamInfo.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\
/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/support/mtlkfront.sh /opt/build/owrtsdk/staging_dir/toolchain-mips_24kc_gcc-8.4.0_musl/bin/mips-*linux-g++ -DHAVE_CONFIG_H -I. -I../../../../../tools/shared/linux -I../../..  -DMTLK_SOURCE_VERSION="\"3.4.99.0.0.exported.pre_git_version.REL_3.4.99\"" -DLOG_LOCAL_OID=MTLKFRONT_WILL_FILL_IT -include /opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/config.h -include /opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/.config.h -I../../../../../tools/rtlogger/shared -g -I../../../../../tools/shared/linux/../ -I../../../../../wireless/shared -I../../../../../wireless/shared/linux -I../../../../../tools/shared/3rd_party/iniparser -I../../../../../tools/mttools/shared -I/opt/build/owrtsdk/staging_dir/target-mips_24kc_musl/usr/include  -I/opt/build/owrtsdk/staging_dir/target-mips_24kc_musl/usr/include/libnl3/ -I/opt/build/owrtsdk/staging_dir/target-mips_24kc_musl/usr/include/libnl3/netlink/genl/ -Wall -Wno-multichar -fno-strict-aliasing -O2 -fno-common -fno-builtin  -I/opt/build/owrtsdk/staging_dir/target-mips_24kc_musl/usr/include/libnl3/ -I/opt/build/owrtsdk/staging_dir/target-mips_24kc_musl/usr/include/libnl3/netlink/genl/  -MT ../../../../../tools/shared/linux/../ParamInfo.o -MD -MP -MF $depbase.Tpo -c -o ../../../../../tools/shared/linux/../ParamInfo.o ../../../../../tools/shared/linux/../ParamInfo.cpp &&\
mv -f $depbase.Tpo $depbase.Po
awk: cmd. line:1: warning: regexp escape sequence `\#' is not a known regexp operator
  LP      /opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/tools/shared/ParamInfo.cpp
awk: cmd. line:1: warning: regexp escape sequence `\#' is not a known regexp operator
  LP      /opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/tools/shared/ParamInfo.h
rm -f libmtlkcpp.a
ar cru libmtlkcpp.a ../../../../../tools/shared/linux/../aux_utils.o ../../../../../tools/shared/linux/../CmdLine.o ../../../../../tools/shared/linux/../Debug.o ../../../../../tools/shared/linux/../ParamInfo.o 
/opt/build/owrtsdk/staging_dir/toolchain-mips_24kc_gcc-8.4.0_musl/bin/mips-openwrt-linux-ranlib libmtlkcpp.a
make[7]: Entering directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/tools/shared/linux'
make[7]: Nothing to be done for 'install-exec-am'.
make[7]: Nothing to be done for 'install-data-am'.
make[7]: Leaving directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/tools/shared/linux'
make[6]: Leaving directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/tools/shared/linux'
make[6]: Entering directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/tools/shared'
make[7]: Entering directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/tools/shared'
make[7]: Nothing to be done for 'install-exec-am'.
make[7]: Nothing to be done for 'install-data-am'.
make[7]: Leaving directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/tools/shared'
make[6]: Leaving directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/tools/shared'
make[5]: Leaving directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/tools/shared'
Making install in wireless/shared
make[5]: Entering directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/wireless/shared'
make[6]: Entering directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/wireless/shared'
make[6]: Nothing to be done for 'install-exec-am'.
make[6]: Nothing to be done for 'install-data-am'.
make[6]: Leaving directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/wireless/shared'
make[5]: Leaving directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/wireless/shared'
Making install in tools
make[5]: Entering directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/tools'
Making install in mttools
make[6]: Entering directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/tools/mttools'
make[7]: Entering directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/tools/mttools'
make[8]: Entering directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/tools/mttools'
make[8]: Nothing to be done for 'install-exec-am'.
make[8]: Nothing to be done for 'install-data-am'.
make[8]: Leaving directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/tools/mttools'
make[7]: Leaving directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/tools/mttools'
make[6]: Leaving directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/tools/mttools'
Making install in mtlkroot
make[6]: Entering directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/tools/mtlkroot'
make[7]: Entering directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/linux-5.4.73'
scripts/kconfig/conf  --syncconfig Kconfig
can't find file Kconfig
make[9]: *** [scripts/kconfig/Makefile:73: syncconfig] Error 1
make[8]: *** [Makefile:590: syncconfig] Error 2
make[7]: *** [Makefile:696: include/config/auto.conf.cmd] Error 2
make[7]: Leaving directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/linux-5.4.73'
make[6]: *** [Makefile:485: mtlkroot.ko] Error 11
make[6]: Leaving directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/tools/mtlkroot'
make[5]: *** [Makefile:587: install-recursive] Error 1
make[5]: Leaving directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288/tools'
make[4]: *** [Makefile:518: install-recursive] Error 1
make[4]: Leaving directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/builds/ugw5.4-vrx288'
make[3]: *** [Makefile:21: all] Error 2
make[3]: Leaving directory '/opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23'
make[2]: *** [Makefile:160: /opt/build/owrtsdk/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/lq-wave300-mandrake-2019.23.23/.built] Error 2
make[2]: Leaving directory '/mnt/sda2/prog/openwrt_lantiq2/own-feeds/openwrt-feeds-teleltq/kernel/lantiq/ltq-wave300-mandrake'
time: package/feeds/teleltq/ltq-wave300-mandrake/compile#27.44#22.95#53.36
make[1]: *** [package/Makefile:114: package/feeds/teleltq/ltq-wave300-mandrake/compile] Error 2
make[1]: Leaving directory '/opt/build/owrtsdk'
make: *** [/opt/build/owrtsdk/include/toplevel.mk:229: package/ltq-wave300-mandrake/compile] Error 2
ERROR: make V=s package/ltq-wave300-mandrake/compile



More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3431

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.