[FS#3242] UAS not working - All devices with USB3.0 affected

OpenWrt Bugs openwrt-bugs at lists.openwrt.org
Wed Jul 22 10:19:36 EDT 2020


A new Flyspray task has been opened.  Details are below. 

User who did this - birry (birry) 

Attached to Project - OpenWrt/LEDE Project
Summary - UAS not working - All devices with USB3.0 affected
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - High
Priority - Very Low
Reported Version - All
Due in Version - Undecided
Due Date - Undecided
Details - USB controller "f10f8000.usb3" is preventing UAS from working on OpenWRT devices, as dmesg states:

[    1.830001] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
[    1.860632] usb 3-1: USB controller f10f8000.usb3 does not support streams, which are required by the UAS driver.
[    1.870949] usb 3-1: Please try an other USB controller if you wish to use UAS.
[    1.878291] usb-storage 3-1:1.0: USB Mass Storage device detected

Checked in OpenWRT 18.04 and 19.03 with Linksys WRT3200ACM and Turris Omnia. This impacts USB3.0 speeds.

To reproduce just hook up a USB3.0 HDD to a OpenWRT device on the USB3.0 port and see dmesg.

Is it possible to try another controller or fix f10f8000.usb3?

More information can be found at the following URL:

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

More information about the openwrt-bugs mailing list