[FS#3217] UniElec U7623 doesn't boot.

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

The following task has a new comment added:

FS#3217 - UniElec U7623 doesn't boot.
User who did this - dwmw2 (dwmw2)

----------
The 4.14 kernel from 19.07 looks like this during this part of the boot (and boots successfully). It looks like it's probing the eMMC at the same time:


[    2.234289] ThumbEE CPU extension supported.
[    2.238552] Registering SWP/SWPB emulation handler
[    2.274805] mmc0: new high speed MMC card at address 0001
[    2.280602] mmcblk0: mmc0:0001 008G70 7.28 GiB 
[    2.285375] mtk-pcie 1a140000.pcie: PCI host bridge to bus 0000:00
[    2.291542] pci_bus 0000:00: root bus resource [io  0x0000-0xffff] (bus address [0x1a160000-0x1a16ffff])
[    2.300991] mmcblk0boot0: mmc0:0001 008G70 partition 1 4.00 MiB
[    2.306961] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[    2.313830] mmcblk0boot1: mmc0:0001 008G70 partition 2 4.00 MiB
[    2.319796] mmcblk0rpmb: mmc0:0001 008G70 partition 3 4.00 MiB, chardev (250:0)
[    2.327391] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.333512] PCI: bus0: Fast back to back transfers disabled
[    2.339112]  mmcblk0: p1 p2 p3
[    2.343053] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
…


Now I note all the complaints from mediatek-mt2701-pinctrl about setting up the MSDC0 pins...
----------

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3217#comment8476

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.