[FS#3539] ramips/mt7620 snapshot does not boot

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

The following task has a new comment added:

FS#3539 - ramips/mt7620 snapshot does not boot
User who did this - Thomas Reifferscheid (reiffert)

----------
The config of the working build:
:~/openwrt$ ./scripts/diffconfig.sh 
CONFIG_TARGET_ramips=y
CONFIG_TARGET_ramips_mt7620=y
CONFIG_TARGET_ramips_mt7620_DEVICE_dlink_dwr-960=y
# CONFIG_DROPBEAR_ED25519 is not set
# CONFIG_KERNEL_KEYS is not set
CONFIG_PACKAGE_ca-certificates=y
CONFIG_PACKAGE_libmbedtls=y
CONFIG_PACKAGE_libustream-mbedtls=y
# CONFIG_PACKAGE_libustream-wolfssl is not set


The mtd layout of the bricked openwrt snapshot install. It was booting after attempting to get into the JBOOT/recovery, pressing reset, switching device on, releasing the reset button after 8 seconds.

 -----------------------------------------------------
 OpenWrt SNAPSHOT, r15371-7e4585e593
 -----------------------------------------------------
root at OpenWrt:~# cat /proc/mtd 
dev:    size   erasesize  name
mtd0: 00010000 00001000 "jboot"
mtd1: 00fe0000 00001000 "firmware"
mtd2: 00203135 00001000 "kernel"
mtd3: 00ddcecb 00001000 "rootfs"
mtd4: 00b20000 00001000 "rootfs_data"
mtd5: 00010000 00001000 "config"
root at OpenWrt:~# 


----------

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3539#comment9236

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.