[FS#3320] Ubiquiti Routerstation compilation produces no sysupgrade image anymore (Attachment added)

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

The following task has a new comment added:

FS#3320 - Ubiquiti Routerstation compilation produces no sysupgrade image anymore
User who did this - Alexandros C. Couloumbis (acoul)

----------
//No. Please read again; I write physically access, i.e. touch, and refer to the power supply, the rectangular black 24V supply. These power supplies from some date onwards have on one side this pin hole. The side opposite the LED, near the RJ45 connectors. So e.g. the device sits in a box in a mast, and the supply is accessible at the ground.
Powering up pressing that switch is detected by the bootloader and it starts waiting for a tftp connection to receive a factory image. //

amazing. I was totally unaware of this remote reset capability through PoE on ubiquiti devices

I guess ubiquiti has a similar to the following circuitry  [[https://forum.mikrotik.com/viewtopic.php?t=124781|discussed on this thread]] build-in their devices:

//Add a photocoupler, like 4N35, and a resistor. Connected near the reset button to command it remotely with two wire by a voltage, for example the power voltage.//

great input William, thank you
----------

One or more files have been attached.

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3320#comment9126

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.