[FS#3489] BulletM5 ath9k wlan not detected
OpenWrt Bugs
openwrt-bugs at lists.openwrt.org
Tue Dec 8 07:04:31 EST 2020
THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.
The following task has a new comment added:
FS#3489 - BulletM5 ath9k wlan not detected
User who did this - Alexandros C. Couloumbis (acoul)
----------
Greetings Russel,
from all the above, do you have any idea as to why on my device, ath9k fails to load & to why enabling CONFIG_PACKAGE_kmod-owl-loader, ath9k successfully loads ?
is it because, for some reason, ath9k can't find the art info & owl-loader works around this ?
// The calibration data is in the art partition, afaik. I see data when I do this: //
dd if=/dev/mtd8 | hexdump -C
same in my device, there is data on /dev/mtd8
here is the output of /proc/mtd
dev: size erasesize name
mtd0: 00040000 00010000 "u-boot"
mtd1: 00010000 00010000 "u-boot-env"
mtd2: 00750000 00010000 "firmware"
mtd3: 00180000 00010000 "kernel"
mtd4: 005d0000 00010000 "rootfs"
mtd5: 003b0000 00010000 "rootfs_data"
mtd6: 00010000 00010000 "board_config"
mtd7: 00040000 00010000 "cfg"
mtd8: 00010000 00010000 "art"
any suggestions as to how further debug this issue ?
thank you for the feedback
----------
More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3489#comment9116
You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.
More information about the openwrt-bugs
mailing list