[FS#3304] MVEBU - sysupgrade may not correctly detect device from bootcmd

[OpenWrt Bugs]

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY.

A new Flyspray task has been opened.  Details are below. 

User who did this - GANDALF (erdoukki) 

Attached to Project - OpenWrt/LEDE Project
Summary - MVEBU - sysupgrade may not correctly detect device from bootcmd
Task Type - Bug Report
Category - Base system
Status - Unconfirmed
Assigned To - 
Operating System - All
Severity - Low
Priority - Very Low
Reported Version - Trunk
Due in Version - Undecided
Due Date - Undecided
Details - forum topic : https://forum.openwrt.org/t/solved-19-07-xx-own-build-unflashable/72297
Solution : https://forum.openwrt.org/t/solved-19-07-xx-own-build-unflashable/72297/8

Sysupgrade do not correctly detect the device from some bootcmd uboot command line ...

I suppose, rootfs is not correctly detected ?

/proc/cmdline okay : console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000 root=/dev/mmcblk0p2 rw rootwait net.ifnames=0 biosdevname=0
/proc/cmdline which make an error : console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000 root=/dev/mmcblk0p2 rw ip=0.0.0.0:0.0.0.0:10.4.50.254:255.255.255.0:marvell:eth0:none nfsroot=0.0.0.0:/dev/mmcblk0p2

when error happend, the message is :
root at NAS:~# sysupgrade -v -T openwrt-19.07.3-mvebu-cortexa53-globalscale_espressobin-v7-emmc-ext4-sdcard.img.gz 
Image not in /tmp, copying...
Unable to determine upgrade device
Image check failed.
root at NAS:~# 

More information can be found at the following URL:
https://bugs.openwrt.org/index.php?do=details&task_id=3304

You are receiving this message because you have requested it from the Flyspray bugtracking system.  If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.