[PATCH] ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1

[Alain Volmat]

Correct the following warnings by adding the required supplies (AVDD, DVDD)
for the ov5640 node.

arch/arm/boot/dts/stm32mp157c-ev1.dtb: camera at 3c: 'AVDD-supply' is a required property
>From schema: Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
arch/arm/boot/dts/stm32mp157c-ev1.dtb: camera at 3c: 'DVDD-supply' is a required property
>From schema: Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml

Signed-off-by: Alain Volmat <alain.volmat at foss.st.com>
---
 arch/arm/boot/dts/stm32mp157c-ev1.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index ba8e9d9a42fa..f27d6dcb6651 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -185,7 +185,9 @@ ov5640: camera at 3c {
 		reg = <0x3c>;
 		clocks = <&clk_ext_camera>;
 		clock-names = "xclk";
+		AVDD-supply = <&v2v8>;
 		DOVDD-supply = <&v2v8>;
+		DVDD-supply = <&v2v8>;
 		powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>;
 		reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
 		rotation = <180>;
-- 
2.25.1