[PATCH] ARM: dts: imx: Use 'eeprom' as node name

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

Devicetree node names should be generic. Use 'eeprom' as node name
to avoid devicetree check warning from at24.yaml.

Signed-off-by: Fabio Estevam <festevam at denx.de>
---
 arch/arm/boot/dts/imx53-tqma53.dtsi   | 2 +-
 arch/arm/boot/dts/imx6q-display5.dtsi | 2 +-
 arch/arm/boot/dts/imx6q-h100.dts      | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index 7e7f9f3b3906..d930739674a1 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -274,7 +274,7 @@ sensor1: lm75 at 48 {
 		reg = <0x48>;
 	};
 
-	eeprom: 24c64 at 50 {
+	eeprom: eeprom at 50 {
 		compatible = "atmel,24c64";
 		pagesize = <32>;
 		reg = <0x50>;
diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi
index fef5d7254536..d18b942a2415 100644
--- a/arch/arm/boot/dts/imx6q-display5.dtsi
+++ b/arch/arm/boot/dts/imx6q-display5.dtsi
@@ -276,7 +276,7 @@ &i2c3 {
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	at24 at 50 {
+	eeprom at 50 {
 		compatible = "atmel,24c256";
 		pagesize = <64>;
 		reg = <0x50>;
diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts
index 6406ade14f57..3fe4591e21f5 100644
--- a/arch/arm/boot/dts/imx6q-h100.dts
+++ b/arch/arm/boot/dts/imx6q-h100.dts
@@ -166,7 +166,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_h100_i2c1>;
 	status = "okay";
 
-	eeprom: 24c02 at 51 {
+	eeprom: eeprom at 51 {
 		compatible = "microchip,24c02", "atmel,24c02";
 		reg = <0x51>;
 	};
-- 
2.34.1