RCU WARNING on 6.4-rc2, TI AM62 and TPS65219

Mon May 22 08:22:15 PDT 2023

On Mon, May 22, 2023 at 11:27:18AM +0200, jerome Neanne wrote:
> 
> 
> On 19/05/2023 16:26, Francesco Dolcini wrote:
> > Hello all,
> > while testing 6.4-rc2 (2d1bcbc6cd70) on a TI K3 AM625 SoC with TPS65219
> > PMIC I noticed this warning.
> > 
> > [   80.117502] systemd-shutdown[1]: All loop devices detached.
> > [   80.123176] systemd-shutdown[1]: Stopping MD devices.
> > [   80.128700] systemd-shutdown[1]: All MD devices stopped.
> > [   80.134123] systemd-shutdown[1]: Detaching DM devices.
> > [   80.139553] systemd-shutdown[1]: All DM devices detached.
> > [   80.144970] systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
> > [   80.162682] systemd-shutdown[1]: Syncing filesystems and block devices.
> > [   80.169602] systemd-shutdown[1]: Rebooting.
> > [   80.173817] kvm: exiting hardware virtualization
> > [   80.213016] reboot: Restarting system
> > [   80.216767] ------------[ cut here ]------------
> > [   80.221380] Voluntary context switch within RCU read-side critical section!
> > [   80.221404] WARNING: CPU: 0 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x31c/0x390
> > [   80.237669] Modules linked in: 8021q garp mrp stp llc cfg80211 usb_f_ncm u_ether bluetooth ecdh_generic ecc rfkill sp
> > idev crct10dif_ce snd_soc_simple_card snd_soc_simple_card_utils rtc_ti_k3 sa2ul sha256_generic libsha256 authenc snd_soc
> > _davinci_mcasp snd_soc_ti_udma snd_soc_ti_edma snd_soc_ti_sdma ti_ads1015 ina2xx industrialio_triggered_buffer pwm_tiehr
> > pwm snd_soc_nau8822 tps65219_pwrbutton lm75 kfifo_buf spi_omap2_mcspi rtc_ds1307 libcomposite fuse drm ipv6
> > [   80.278507] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 6.4.0-rc2-00166-gf932e7bb873b #3
> > [   80.286938] Hardware name: Toradex Verdin AM62 on Verdin Development Board (DT)
> > [   80.294238] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> > [   80.301193] pc : rcu_note_context_switch+0x31c/0x390
> > [   80.306154] lr : rcu_note_context_switch+0x31c/0x390
> > [   80.311114] sp : ffff80000a71b4c0
> > [   80.314422] x29: ffff80000a71b4c0 x28: 0000000000000000 x27: ffff000000118000
> > [   80.321556] x26: 0000000000000000 x25: ffff000000118000 x24: ffff800008fafbd8
> > [   80.328689] x23: ffff000000118000 x22: 0000000000000000 x21: ffff000000118000
> > [   80.335822] x20: 0000000000000000 x19: ffff00003fd68cc0 x18: 0000000000000010
> > [   80.342955] x17: 0000000000000000 x16: 0000000000000000 x15: ffff000000118000
> > [   80.350087] x14: 00000000000001c5 x13: ffff000000118478 x12: 00000000ffffffea
> > [   80.357220] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffff80000a2a9a98
> > [   80.364352] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 000000000000bff4
> > [   80.371485] x5 : 0000000000057fa8 x4 : 0000000000000000 x3 : 0000000000000000
> > [   80.378617] x2 : ffff80000a251990 x1 : 0000000000000000 x0 : 0000000000000000
> > [   80.385751] Call trace:
> > [   80.388193]  rcu_note_context_switch+0x31c/0x390
> > [   80.392807]  __schedule+0x98/0xa7c
> > [   80.396214]  schedule+0x5c/0xc4
> > [   80.399354]  schedule_timeout+0x180/0x25c
> > [   80.403362]  wait_for_completion_timeout+0x80/0x15c
> > [   80.408238]  ti_sci_set_device_state+0xb4/0x1e4
> > [   80.412771]  ti_sci_cmd_get_device_exclusive+0x18/0x24
> > [   80.417907]  ti_sci_pd_power_on+0x28/0x48
> > [   80.421914]  _genpd_power_on+0x94/0x154
> > [   80.425749]  genpd_power_on.part.0+0xa4/0x174
> > [   80.430104]  genpd_runtime_resume+0x118/0x294
> > [   80.434457]  __rpm_callback+0x48/0x140
> > [   80.438206]  rpm_callback+0x6c/0x78
> > [   80.441692]  rpm_resume+0x3bc/0x59c
> > [   80.445179]  __pm_runtime_resume+0x4c/0x90
> > [   80.449272]  omap_i2c_xfer_common+0x38/0x598
> > [   80.453540]  omap_i2c_xfer_polling+0x14/0x20
> > [   80.457804]  __i2c_transfer+0x138/0x35c
> > [   80.461642]  i2c_transfer+0x94/0xf4
> > [   80.465130]  regmap_i2c_read+0x60/0xa8
> > [   80.468879]  _regmap_raw_read+0xf0/0x170
> > [   80.472799]  _regmap_bus_read+0x44/0x7c
> > [   80.476632]  _regmap_read+0x64/0xf4
> > [   80.480118]  _regmap_update_bits+0xf4/0x130
> > [   80.484298]  regmap_update_bits_base+0x64/0x98
> > [   80.488738]  tps65219_restart+0x38/0x48
> > [   80.492576]  atomic_notifier_call_chain+0x60/0x90
> > [   80.497280]  do_kernel_restart+0x24/0x30
> > [   80.501202]  machine_restart+0x38/0x5c
> > [   80.504950]  kernel_restart+0x88/0x98
> > [   80.508612]  __do_sys_reboot+0x1e0/0x264
> > [   80.512533]  __arm64_sys_reboot+0x24/0x30
> > [   80.516538]  invoke_syscall+0x44/0x104
> > [   80.520287]  el0_svc_common.constprop.0+0x44/0xec
> > [   80.524988]  do_el0_svc+0x38/0x98
> > [   80.528302]  el0_svc+0x2c/0x84
> > [   80.531354]  el0t_64_sync_handler+0xb8/0xbc
> > [   80.535534]  el0t_64_sync+0x190/0x194
> > [   80.539192] ---[ end trace 0000000000000000 ]---
> > 
> > 
> > This looks similar to what is described here [1], same issue or
> > something else? Any suggestion?
> > 
> > The issue is systematic and happens at every boot. With a TI downstream
> > 5.10 kernel this issue was never experienced.
> > 
> > Francesco
> > 
> > [1] https://lore.kernel.org/all/20230327-tegra-pmic-reboot-v6-0-af44a4cd82e9@skidata.com/
> > 
> I don't have the same board to test and don't experience this boot issue
> with the am62 board I'm using (the board version I have is a custom board
> not released publicly by TI unfortunately).
> 
> Notice that:
> https://lore.kernel.org/lkml/20230511122100.2225417-1-jneanne@baylibre.com/
> 
> Is not yet applied and would help handle shutdown/reboot under some
> conditions.

With that patch applied poweroff is working, but this RCU warning is not
solved and is present both when doing a "poweroff" or a "reboot".

I guess that the issue here is something else.

Francesco