[PATCH] riscv: dts: allwinner: d1: Add SPI0 controller node

[Maksim Kiselev]

Some boards form the MangoPi family (MQ\MQ-Dual\MQ-R) may have
an optional SPI flash that connects to the SPI0 controller.
This controller is already supported by sun8i-h3-spi driver.
So let's add its DT node.

Signed-off-by: Maksim Kiselev <bigunclemax at gmail.com>
---
 .../boot/dts/allwinner/sunxi-d1s-t113.dtsi    | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index 922e8e0e2c09..d2de211d67d7 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -108,6 +108,12 @@ rmii_pe_pins: rmii-pe-pins {
 				function = "emac";
 			};
 
+			/omit-if-no-ref/
+			spi0_pins: spi0-pins {
+				pins = "PC2", "PC3", "PC4", "PC5";
+				function = "spi0";
+			};
+
 			/omit-if-no-ref/
 			uart1_pg6_pins: uart1-pg6-pins {
 				pins = "PG6", "PG7";
@@ -447,6 +453,20 @@ mmc2: mmc at 4022000 {
 			#size-cells = <0>;
 		};
 
+		spi0: spi at 4025000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x04025000 0x300>;
+			interrupts = <SOC_PERIPHERAL_IRQ(15) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		usb_otg: usb at 4100000 {
 			compatible = "allwinner,sun20i-d1-musb",
 				     "allwinner,sun8i-a33-musb";
-- 
2.39.2