[PATCH 2/2] ARM: dts: BCM5301X: Relicense Florian's code to the GPL 2.0+ / MIT
Rafał Miłecki
zajec5 at gmail.com
Wed May 3 05:16:11 PDT 2023
From: Rafał Miłecki <rafal at milecki.pl>
All BCM5301X device DTS files use dual licensing. Try the same for SoC.
Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
arch/arm/boot/dts/bcm-ns.dtsi | 36 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/bcm5301x.dtsi | 39 ---------------------------------
2 files changed, 36 insertions(+), 39 deletions(-)
diff --git a/arch/arm/boot/dts/bcm-ns.dtsi b/arch/arm/boot/dts/bcm-ns.dtsi
index 21d672aba75a..cc977bbc142b 100644
--- a/arch/arm/boot/dts/bcm-ns.dtsi
+++ b/arch/arm/boot/dts/bcm-ns.dtsi
@@ -19,6 +19,8 @@ chipcommon: chipcommon at 0 {
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
pcie0: pcie at 12000 {
@@ -109,6 +111,22 @@ xhci_port1: port at 1 {
};
};
};
+
+ gmac0: ethernet at 24000 {
+ reg = <0x24000 0x800>;
+ };
+
+ gmac1: ethernet at 25000 {
+ reg = <0x25000 0x800>;
+ };
+
+ gmac2: ethernet at 26000 {
+ reg = <0x26000 0x800>;
+ };
+
+ gmac3: ethernet at 27000 {
+ reg = <0x27000 0x800>;
+ };
};
mdio: mdio at 18003000 {
@@ -118,6 +136,24 @@ mdio: mdio at 18003000 {
#address-cells = <1>;
};
+ rng: rng at 18004000 {
+ compatible = "brcm,bcm5301x-rng";
+ reg = <0x18004000 0x14>;
+ };
+
+ srab: ethernet-switch at 18007000 {
+ compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
+ reg = <0x18007000 0x1000>;
+
+ status = "disabled";
+
+ /* ports are defined in board DTS */
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
dmu-bus at 1800c000 {
compatible = "simple-bus";
ranges = <0 0x1800c000 0x1000>;
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 2aa3a9f09641..2890fa3c5e67 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -218,30 +218,9 @@ axi at 18000000 {
<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- chipcommon at 0 {
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
pcie2: pcie at 14000 {
reg = <0x00014000 0x1000>;
};
-
- gmac0: ethernet at 24000 {
- reg = <0x24000 0x800>;
- };
-
- gmac1: ethernet at 25000 {
- reg = <0x25000 0x800>;
- };
-
- gmac2: ethernet at 26000 {
- reg = <0x26000 0x800>;
- };
-
- gmac3: ethernet at 27000 {
- reg = <0x27000 0x800>;
- };
};
pwm: pwm at 18002000 {
@@ -322,24 +301,6 @@ genpll: clock-controller at 140 {
};
};
- srab: ethernet-switch at 18007000 {
- compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
- reg = <0x18007000 0x1000>;
-
- status = "disabled";
-
- /* ports are defined in board DTS */
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- rng: rng at 18004000 {
- compatible = "brcm,bcm5301x-rng";
- reg = <0x18004000 0x14>;
- };
-
nand_controller: nand-controller at 18028000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
--
2.35.3
More information about the linux-arm-kernel
mailing list